incorrect interim results when crossing UTC time midnight for Custom Tests.
positional jump when loading a .vbc line file of 3 points.
issues accessing the Online mode on the Windows 7 operating system.
Please note: This software is considered pre-release. It has been tested to ensure any new functionality or bug fix has been implemented correctly, but has not yet completed a full testing cycle and sign off – there may still be other bugs in this version!
Do not use beta versions when performing critical tests, unless a problem with a release version prevents you from completing the required tests satisfactorily.
1.11.31 - 8 Oct 2021
Support added for VBOX Touch online connection.
Frequency distribution analysis test results can now be further analysed to see distance or time spent within a channel value range, or how often the channel was within a value range.
Wheel Slip channels added to Custom Test Recent files list. It now shows full file path as a tooltip
'Time since last run' can now include or ignore aborted runs
Report columns for Test Time, Distance, Start Speed, End Speed & Average Accel use decimal places as configured in Options
R41 test now usable with a larger range of PMR values
UNR79 tests now have smoothing on Lateral Acceleration due to regulation change
Interim results now available on UNR79 tests
R117 Pass-By-Noise tests can now be run in a single direction
Elapsed distance accuracy improved by counting start of movement from 0.5 km/h rather than 0.8 km/h
Support added for online connection to VBOX Sigma - our new low cost RTK data logger.
1ft rollout accuracy improvement
Map Gates and Scale flickering when online
Zoom and cursor position lost after changing smoothing when in Workspace
Software crash when loading in a VBO file exported from a VBTS session when the session had been 'paused'
Certain MFDD values could cause VBTS to freeze
Exception given if no heading data present during brake test
When exporting test results, 'Time/Distance since last run' column values are always zero.
Exception when setting gate too close to end of movement
UNR79 lane cross not reported correctly when no vehicle shape/overlay defined
After renaming a session (by clicking on the tab in test results) that session name is not being reflected on reports
R117 Pass-by-Noise - changing tyre class wasn't automatically updating results
Maths channels that were copied & pasted did not retain formatting
Saving VBO file session 'Please try again after a few seconds' preventing the software from being closed
With 'refresh channel names' unticked, VBTS could freeze when connecting to unit
VBTS now more tolerant of missing or corrupted data
Reset on Start Condition advanced test configuration feature was not working correctly in some situations
1.10.83 - 23 Oct 2020
Speed Sensor connection issue fixed.
UI delay after completing online run in more than one session fixed.
Error when moving dashboard gauges with unicode character labels.
GTR15 Coastdown: Incorrect time in the result where time crossed UTC midnight.
Error Message "Could not load file or assembly -System.Net.Http" fixed.
Results 'Filter' feature now appearing correctly.
1.10.68 - Oct 2020
Run Graph now displays an interpolated point for the start and the end of the run for a given channel. This helps to make it clear when viewing the graph what the start of run and end of run values were for that channel.
Measure Tool now interpolates the start and end of the range. Previously, the measure tool provided measurements from the first sample to the last sample within the range only.
End of Session condition now available in Custom Test plugin. This allows a test to be configured, for example, to start immediately and then stop at the end of the file.
New -Reset on start condition- option within a Brake -Trigger- test. This allows the test reset condition to be disabled, so the test will always start on the first trigger.
It is now possible to Copy Individual Result Cells, or multi-select cells by holding control, without including result column headers.
Session Colour now displayed within the File List ribbon drop-down menu on the Home tab.
Gauge Test channel selection organised by source of channel data, i.e. test column gauges, count down gauges, default gauges and test plugin specific gauges.
UNR79 Lane Keep - distance to lane computations now work when just one lane is loaded.
New Release Notes section within the File Menu detailing information such as new plugins, new features and bug fixes in relation to the current Software version. Release notes can also be accessed next to the software version within the About Menu.
It is now possible to Expand and Collapse Conditions within Test Settings.
Dashboard no longer rearranges gauges automatically. Instead, the user has the option to zoom the dashboard in and out depending on available space using the mouse wheel or zoom buttons on the ribbon
Other Dashboard improvements to include grid now being hidden and alignment increments being reduced, angular meter avoids wasted margins - and so renders much better when sized small, and new 'Dashboard Update Rate' available in options
Custom Test now allows a test to be started when a channel value >= a given value. Previously a test could only be started when a specified value was crossed
Lap Timing plugin (beta) - perform lap analysis for driving around a circuit. Also allows remote data connection for live analysis in conjunction with SimPack
Improved support for VBOX Touch data files
R51 Pass By Noise wide open throttle result column between PP- line and BB- Line
R51 Pass By Noise ability to set engine location
Chart now defaults to show the whole session - even when more than one run is selected. To compare runs, click on the chart then choose the 'Run Compare' option in the ribbon.
Clear All button to remove all open files/sessions
Brake Test 'Reset on Start Condition' advanced test configuration option added.
Ability to 'playback' a vbo file. Previously this was only possible if the file had associated video.
New 'Calculated Column' feature to allow calculations based on test results. Calculations can be based on other result columns or start/end/average/min/max/std.dev value of channel during run
VBOX Setup now installed automatically on new installs of VBOX Test Suite.
VBOX Drivers are now installed on new installations without a separate install prompt.
It is now possible to install VBOX Test Suite silently via a batch script.
Crash when cutting 'Before Cursor'.
Legend order now consistent between charts.
Fixed issue preventing moving average and cycle TxPH calculation in TxPH plug-in when the file starts close to UTC midnight.
Exception message when copying column with result ticked.
KML export was including 0,0 positions from dropouts in averaging to give positions halfway between the two. Now dropouts are ignored.
Improved handling of data when UTC time crosses midnight
Brake Test 'Time since last run' fixed to exclude accidental test starts.
Zoom when 'Centre on vehicle' is enabled on map.
Improved map handling when sats are 0 but position is present.
Fixed Coastdown J2263 bug with run heading that crosses 0 degrees
Associated audio file continued playback issue resolved.
TxPH Moving avg and cycle value not calculated in specific situations / files fixed.
Vbo export losing lat/long precision
VB3iS vertical velocity fix
Copy chart as image causes user added chart to disappear
Channel names not shown on all charts for a screenshot.
Map jumping as user attempts to pan (caused by small mouse drag at same time)
Map scale numbers seem to jump around when zooming in and out
Error after deleting gate
Display all points on live chart - depends on Dashboard Rate being set in options.
1.9.10 - Nov 2019
Added ability to connect online to a unit without refreshing channel names. This feature was previously known as 'Telemetry Mode' in VBOX Tools.
Added 'Braking Accuracy' pass condition.
VB3iS Kalman Filter status on serial.
Lat and Long_raw units updated for VB3iS.
Log rate calculation was sometimes incorrect on short files and resulted in software performance issue.
VBTS map has improved handling of data when coasting (without SATS).
AD channel names sometimes did not display as configured within VBOX Setup. Now fixed.
Adding gates in populated areas performance improved.
Performance improvements with 2nd channel for live chart gauge.
Improved connection resume after power cycle of unit or after exiting VBOX Setup and returning to VBTS.
TxPH fix to avoid incorrectly going into run comparison mode.
18.104.22.16812 - Sep 2019
ADAS UNR79 CSF (beta)
ADAS UNR79 Lane Keeping (beta)
ADAS UNR79 Max Lateral Accel (beta)
Pass-By Noise EPA (beta)
Gates added to workspace
VB3iS serial support
Lane survey functionality (added to UNR79 and Park Assist)
VBTS in Portuguese, Spanish, Russian, Italian, Korean
Video screen capture
Multiple video layout
Support for voice tagging
Add secondary channel to live chart -gauge-
Path follow UI & checkbox added 'show previous set to 5 seconds for backward compatibility'
Calibration warning whenever a calibration is selected/required
Auto scale for live chart 'gauge'
Renaming of result column titles
Saving of interim conditions to VBTS config
Saving of chart axis alterations to VBTS config
KML export UI trace.
Video playback 'hardware acceleration' (mainly for lower powered machines for multiple video)
Ability to load S/F lines
Dual antenna channel re-added to VBTS (VB3i)
Accel Use of gates as start conditions
Improve map performance for long running tests
Graph scaling improvements (for large files)
Lap timing availability improved
Test Suite handling of VB3i cycles
Time stamp of saved data improved
Files from VBOX Pro fixed (log rate error)
'Vehicle up' feature improved
J2909 'missing 20th stop' present
Bluetooth connections improved
Latency issues improved on lower powered machines
Adding gates 'online' improved
22.214.171.1243 - Feb 2019
R138 Pass-By Noise for electric vehicles
R117 Pass-By Noise for tyres (beta)
Park Assist (beta)
Centre Line Deviation check added to Coastdown plugins
Chinese and Japanese language support
Default results columns can be removed
Jump to data point from the measure tool
VBOX Mini micro input module channels can now be viewed live
'Not between' alert condition added to gauges
Trigger channel auto scales to over-laid channel
Interim results now interpolates between samples
Vehicle overlay uses True Heading when available
Multiple Video VBOX files can now be opened
Trigger ignored for 3 seconds after test start (Brake Tests)
General chart improvements
General map improvements
Pass-by Noise accuracy improvements when starting on trigger
Elapsed Time calculation fixed when using -log when moving-
VB2SX modules no longer freezing when online
-Cut- chart action improved
Math Channel errors fixed
Kalman Filter status correctly displayed online
VBOX unit type and log rate recognised correctly
'Brake Trigger' renamed to 'Trigger'
HASP key removed from installer and plugins
126.96.36.1997 - Jun 2018
R138 Pass-By Noise for electric vehicles (beta)
R78 Braking for motorcycles (beta)
Interim conditions as columns and between values
VBOX Sport online compatibility (via Bluetooth)
Can view chart data in -sharp- mode (Tools functionality) and can remove data points
End User License Agreement window presented during install