Skip to main content

IMU01/ IMU02/ IMU03 - Release Notes

Compatible Products (Product Code):
VBIMU01
VBIMU02
VBIMU03

1.26 - January 2009
Upgrade on CAN communications
Note: This firmware version will be required for IMU integration on VB3i firmware version 1.05 b0010 or higher. 

1.25 - May 2009
IMU integration functionality added. 

1.24 - February 2009
This firmware update is for compatibility with the VBOX 3i 

1.22 - July 2007
Cures a problem with SC light in polled mode

1.21 - September 2006
Allows the SC light to function properly on the VBIMU02
Allows new data formats (16-bit unsigned, 32-bit signed and unsigned)
This firmware requires the latest version of the Racelogic Stand Alone Module Setup software to enable the latest features.
This firmware upgrade can only be used on units with firmware version 1.12 or higher. Any lower versions require hardware modifications and re-calibration.
Please contact Racelogic for information regarding upgrading from lower firmware versions.

1.15 - November 2005
This upgrade allows the IMU to send data in both (existing) IEEE 32-bit float and (new) 16-bit signed integer formats in polled and timed standalone modes.
This firmware requires the latest version of the Racelogic Stand Alone Module Setup software to enable the latest features.
This firmware upgrade can only be used on units with firmware version 1.12 or higher. Any lower versions require hardware modifications and re-calibration.
Please contact Racelogic for information regarding upgrading from lower firmware versions.

Yaw Rate Sensor - Release Notes

Compatible Products (Product Code):
VBYAW03

1.25 - January 2009
Update on CAN communications 

1.24 - February 2009
This firmware update is for compatibility with the VBOX 3i 

1.22 - July 2007
Allows new data formats (16-bit unsigned/signed, 32-bit signed/unsigned)
This firmware requires the latest version of the Racelogic Stand Alone Module Setup software to enable the latest features.
This firmware upgrade can only be used on units with firmware version 1.12 or higher. Any lower versions require hardware modifications and re-calibration.
Please contact Racelogic for information regarding upgrading from lower firmware versions.

1.13 - March 2005
This firmware upgrade can only be used on units with firmware version 1.12 or higher. Any lower versions require hardware modifications and re-calibration.
Please contact Racelogic for information regarding upgrading from lower firmware versions.

Bleiben Sie auf dem Laufenden

Sind Sie an Produktupdates, Info zu den neuesten Software-Releases, Veranstaltungen und Angeboten interessiert?